Vinotemp Wine-Mate WM-32520HZD, Инструкция по установке, использованию и уходу

Страница: 18 / 27

- 17 -
3) Press up/down keys / to scroll to the required parameter within 10 sec.
4) Press the “ SET ” key to display its value.
5) Use up/down keys to change its value within 10 sec.
6) Press “ SET ” to store the new value.
7) To exit : Press SET + or wait 15sec without pressing a key.
PARAMETER DESCRIPTION DEFAULT VALUE
Set
set-point (
°
)
55
Hy
temperature regulation differential (
°
)
4
AC anti-short cycle delay (min) 10
Con compress on with probe faulty (min) 15
CoF compress off with probe faulty (min) 30
CF
temperature unit (
° F / ° C
)
F: Fahrenheit
rES display resolution in: integer
dLy temperature display delay (min) 1
ot
probe calibration (
°
)
0
US maximum set-point (
°
) 65
LS
minimum set-point (
°
)
50
idF defrost cycle interval time (hour) 12
MdF defrost cycle endurance time (min) 30
ALC temperature alarm type rE: relative to set-point
ALU high temperature alarm (
°
) 10
ALL
low temperature alarm (
°
)
10
AFH alarm recovery differential (
°
) 5
ALd temperature alarm delay (min) 60
dAO temperature alarm delay on startup (hr) 23
SAA
heater set-point (
°
)
40
SHy
heater regulation differential (
°
)
4
FnC fan operating mode C-n: on with compressor & off during defrost
Fon fan on with compressor off (min) 0
FoF fan off with compressor off (min) 15
NOTE : Depending on the unit, not all parameters are used.