ICX-500 Getting Started Guide
This document serves as a basic getting started guide for the ICX-500 Intelligent Communication Gateway.
Zenitel
takes no responsibility for damages caused by improper or inadequate mounting
. The ICX-500 product
package comprises the following components:
Item Number
Item Name
Description
1002000100
ICX-500
Intelligent Communication Gateway
1002500010
IA-RS1
Rack Shelf for ICX-500
1002500020
IA-MB1
Mounting Bracket for ICX-500
1002510000
IPS-AC1
PSU, Input 85-264 VAC, Output 48 VDC, DIN-Rail
1
ICX-500 Connections
Ethernet
Eth0 / Eth1
For initial network connection to ICX-500, use Eth0:
Default IP:
169.254.1.5
User name:
admin
Password:
alphaadmin
ICX-500 configuration is done using AlphaPro and ICXweb. For
detailed configuration guidelines please visit
Power
24-48VDC
ICX-500 shall be powered from a DC power supply with nominal
voltage 24VDC or 48VDC. In order to comply with UL safety
requirements, ICX-500 has to be powered by a Limited Power
Source (LPS) or PS2 (based on IEC/UL 62368-1 definition) or NEC
Class 2 source of supply, with maximum power of 100W.
Zenitel's PSU IPS-AC1 (1002510000) meets this criterion.
RS232
RJ45
ICX-500 RS232 port is the RJ45 part of the dual connector
RS232/USB
USB
USB A
USB micro-B
ICX-500 features one USB A and one USB micro-B connector
Fault Relay
3-pole Terminal Block Fault Relay is used to indicate system status together with Fault
LED. The Fault Relay port can be connected to a logical input of a
third-party external system and is not carrying any current/voltage.
SD Card
Micro SD Card
Used for external storage or system recovery (Behind protection lid)
Factory
Default Button
Tact Switch
Used for resetting ICX-500 to factory settings (Behind protection lid)
