VINCENT CD-S5, Инструкция по эксплуатации

Страница: 38 / 64

38
Vincent
OPERATING THE APPLIANCE
ADVANCED PLAYBACK FUNCTIONS
Operation Button(s) Description
Indication of the
remaining playing time
REMAIN (15)
After pressing this remote control key while the CD is playing, the remai-
ning time of the current track will be shown (indicated by the text
“REMAIN" in the display (1)). Pressing the key again switches the display
to the remaining playing time of the entire CD or the entire program, with
the display then showing “REMAIN ALL”. Pressing the key a third time
switches back to the normal playing time display.
Switch between normal
and random playback
RANDOM (27)
The function activated with this remote control button ensures that all the
CD tracks are played in random order. This function cannot be used for
playing a program set up with “PGM” (26). If this button is pressed during
play or pause, the current track is stopped and the playing of all the CD
tracks in random order begins. In the display, this play mode will be indica-
ted by the text “RAN”. Pressing the “RANDOM” button again switches off
random playing and playing will continue from the current position.
Switch between playing
the content of the CD
once, repeating an indivi-
dual track and repeating
all the tracks on the CD
REPEAT (19)
If this button is pressed once while the CD is playing, the current track will
be played over and over again when it has finished. In the display (1) this
operation mode is indicated by the text “REPEAT 1”. If this button is pres-
sed twice while the CD was playing, then the entire CD or the entire pro-
gram will be played over and over again when it has finished. In the dis-
play this operation mode is indicated by the text “REPEAT ALL”. A third
press of the key switches this function off. The desired repeat mode can
also be switched on even when play is stopped or for a selected pro-
gram. The “REPEAT” button is only on the remote control.
Repeat a custom section
of the track as an end-
less loop
A-B (17)
While the CD is playing, the first press of this key marks the start of the
section (A) and the second press marks the end of this section (B). As soon
as both points are selected, the player continues to play the marked
extract over and over again until the “A-B” key is pressed again or
“STOP” (8)(22) is pressed. In the display (1) this play mode is indicated
with the symbol “A
B”. After the A-B playback has been stopped with
the “STOP” key (8)(22), the marked points will be deleted. This play opti-
on too can only be controlled via the remote control.
Play a short introduction
of every track
INTRO (18)
You can press this remote control key if the beginnig of every track is only
to be played for a brief time. In this mode the first ten seconds of the track
will be played then it will skip to the next track in the sequence. This functi-
on is also known by the term “Intro Scan“. Even if a program has been set
up for the play sequence (26), all the CD tracks will each be played once
for a brief time after the “INTRO” key has been pressed. Pressing this key
again ends the Intro Mode and continues playing the remaining section
from the current position onwards. The text “INTRO” will be shown on the
display (1) while the “Intro Sscan” is active. If this key is pressed during
play or pause, the Intro Mode always starts with the first CD track.