vimec V64 B.C., Использование и обслуживание

Страница: 23 / 49

7602026
22
f) Connect the lateral guard board operating cables
(Fig. 24/f) and frontal (Fig. 24/e) to the fork (Fig. 24/b).
-
Tighten with nut and screw.
- Insert the eccentric (Fig. 24/h) with handling belt (Fig.
24/g), front chute on the special pin (Fig. 24/i) and
block with seeger (Fig. 24/m).
FIG.24
125
b
a
d
f e
B.R.: fix the cable (Fig. 24/f) already present on the
side bar chute with special screws.
- Fix the cable eye (Fig. 24/e) to the eccentric (Fig. 24/
h) by screw, nut and lock nut leaving the necessary
clearance for the rotation of the eye itself.
b
Proceeds to check the proper working of the front ac-
cess chute:
- Check the angle between the chute (in working posi-
tion) and the footboard is 90° (Fig. 25).
- Check the front access micro chute intervenes with a
maximum rotation of 30° of the same chute with re-
spect to the working position as in Fig. 25.
- If the guards are not opened or closed correctly, adjust
to the specified position using the register fork (Fig.21/
b).
FIG.25 FIG.26
b c
g) Replace the top plate on the platform using the rela-
tive fixing screws.
h) Remove the wedge and the plastic clamp (Fig. 21/
c/d) used to keep the platform horizontal during the
adjustments from the platform supports.
i) Tighten with a driving torque of 4 daN ± 0,1the dowel,
the nut and the locknut (Fig. 26/a,b,c).
l) Check friction group is engaged.
h
i
m
g
c e
a