Villa Visitor T30 C-DR, Руководство пользователя

Страница: 29 / 74

Visitor T30 C-DR User's Manual
[File: 218899-01-01-B.docx] Page 29/74
5
MESSAGES
The equipment foresees three types of messages on display:
S = Status of equipment
No influence on the working
W = Warning
Press the key RESET on the keyboard to delete the warning message and go on to work.
F = Error
The equipment must be switched ON again.
A list of errors is created to ease the work of Service personnel.
The message is displayed in the language used for the
equipment configuration.
All warning messages must be reset by the operator
through the key RESET near the message.
Status messages
Typ. Text Meaning Intervention
S READY The equipment is ready to perform an
exposure
S WAITING Preparation phase
Wait for message “READY”
S MANUAL
S DAP READY Dosimeter ready -
Warning messages
Text Text Meaning Intervention
W CLOCK ERR. System clock error Press the RESET key to go on
W INI. APR APR checksum error Press the RESET key to go on
W ERROR IN APR An APR error is out of scale Set differently the parameters
W TUBE SEASONING After a long idle period (3 months or
more) it is necessary to proceed to the
X-ray tube seasoning, with the
purpose to avoid serious faults Press the RESET key to go on, call
Service for the tube seasoning
W HOT TUBE The temperature of the monobloc has
reached the max. allowed value Wait the monobloc cooling
W EXPIRED TIME The x-ray handswitch has been
pressed at the “1° step” for more than
15 seconds Release the handswitch and repeat the
x-ray
W MANUAL STOP The x-ray handswitch has been
released before the end of the
exposure Press the RESET key to go on
W INACTIVE DAP Dosimeter not connected -
- MAX DOSE The doses counter has reached the
max. value that can be displayed. Press the F1+RESET key to reset the
value.
W DAP ERROR Dosimeter connected, but in error.
Press the RESET key and call
Service.
- DAP RESET The sum of the product-area doses
has been reset. -