TAK-4202
Two-Input Voice
Alarm Dialer
October 30, 2008
Power:
120V AC/12V DC 500 mA, UL listed adapter provided
Dimensions:
133mm x 91mm x 44mm (5.25” x 3.6” x 1.75”)
Shipping Weight:
0.68 Kg (1.5 lbs)
Environmental:
0°C to 32°C (32°F to 90°F) with 5% to 95% non-
condensing humidity
Talk Battery:
12V DC
Touch Tone Dialing:
120 ms on/off, 50 ms on/off
CPC Detection Time:
320 ms minimum
Message Record Time:
2 minutes
Sampling Rate:
64 K (equivalent)
Input Detection Time:
80 ms with Qualifier Timer set to 0
Resolution Qualifier Timer:
1 second to 18 hours (see page 3)
Resolution Resume Timer:
1 second to 18 hours (see page 3)
Connections:
(1) RJ11 jack for telco connection, (1) 4 position
screw terminal block for inputs
Voice Alarm Dialing from Two Inputs
P
P
r
r
a
a
c
c
t
t
i
i
c
c
e
e
T
T
E
E
L
L
E
E
C
C
O
O
M
M
S
S
O
O
L
L
U
U
T
T
I
I
O
O
N
N
S
S
F
F
O
O
R
R
T
T
H
H
E
E
2
2
1
1
S
S
T
T
C
C
E
E
N
N
T
T
U
U
R
R
Y
Y
TECHNICAL
TECHNICAL
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
• Non-volatile memory (no batteries required)
• Stores up to seven 32-digit phone numbers per
input (fourteen 32-digit numbers total)
• 2 minutes of record time (1 minute per input)
• Programmable message repeat counter
• Programmable lap counter
• Two inputs programmable for normally open or normally
closed and enabled or disabled
• Programmable ring delay for remote programming and
alarm polling
• Programmable qualifier timer for each input (time
for an event to be qualified as an alarm)
• Programmable resume timer for each input (time
following reset for input to become active again)
• Call progress detection
• Programmable ringback limit for call progress
• Remote security and access codes
• Local or remote programming and recording
• Compatible with the
RC-2A
and
RC-3
remote DTMF
controllers
• Phone numbers may be programmed as pager num-
bers (no voice message played)
• Programmable hookswitch flash before dialing
Viking’s
K-202-DVA
is a fully programmable two-input,
multi-number auto dialer, designed for emergency and
non-emergency message notification. The
K-202-DVA
has two dry contact inputs, each of which can dial up to
seven 32-digit phone numbers and play a message up
to 1 minute in length specific to that input.
Messages can be recorded locally or remotely with a
total message time for both inputs of two minutes. The
K-202-DVA
has call progress detection capability with
normal and fast busy, call pickup, CPC and ring-no-
answer detection. Programming is easily done with a
Touch Tone phone.
• Security/burglar/fire alarm notification
• System alarm or equipment malfunction notification
• Environmental warning notification
• Contacting personnel via numeric pagers
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
www.AlphaCommunications.com
