background image

27

26

Only authorized replacement parts may be used in performing service on the appliance.
All servicing should be referred to a qualified technician.

Contact Viking Range Corporation, 1-888-VIKING1 (845-4641), for the nearest service parts
distributor in your area or write to:

VIKING RANGE CORPORATION

PREFERRED SERVICE

1803 Hwy 82W

Greenwood, Mississippi 38930 USA

The serial number and model number for your range can be found by
opening the door and looking under the control panel.

Record the following information indicated below. You will need it if
service is ever required.

Model number

____________________________________________________________________________________

Serial number

_____________________________________________________________________________________

Date of purchase

__________________________________________________________________________________

Date installed

______________________________________________________________________________________

Dealer's name

_____________________________________________________________________________________

Address

___________________________________________________________________________________________

These installation instructions should remain with the unit

for future reference.

Service & Registration

Содержание RDSCD2305BSS















Отзывы: