QR W24
user manual
CZ/SK/EN/DE/HU
VIKING products are distributed and serviced by: BONA SPES s.r.o.
Řepčín 250, Olomouc 77900, Czechia, VAT No.: CZ03476774,
+420 777 109 009 www.best-power.cz, [email protected]
MADE IN CHINA
7
6
5
4
3
2
1
1. LED digital displey
2. ON/OFF
3. USB1 - quick charge
4. USB2-3
5. USB-C
6. Micro USB
7. Lightning(fruit)
General Introduc�on
charged with QC
adaptor
PN
-
961PD
145.5*72.8
*14.3
197*93.5
*14.3
220
415
3.7V
10000mAh
37Wh
3.7V
20000mAh
74Wh
≥
6300mAh
(5V)
≥
31.5Wh
≥
12580mAh
(5V)
≥
62
.
9Wh
Protec�ve func�ons
PN
-
962PD
Size
(mm)
L*W*H
N.W
.
(g)
Model Capacity
Rated
Output
Input
Output
Micro:
5V 2A 9V 2A
12V 1.5A
‘Fruit’
:5V 2A
Type-C(PD3.0 IN/OUT): 5V 3A, 9V 2A, 12V 1.5A (18W)
Total OUT: 5V 3A
MAX
Micro:
5V 2A 9V 2A
12V 1.5A
‘Fruit’
:5V 2A
Out1/Out2:
5V 3A, 9V 2A,
12V 1.5A (18W),
4.3V-5V 4.5A(22.5W)
Out1: 5V 3A, 9V 2A,
12V 1.5A (18W),
4.3V-5V 4.5A(22.5W)
ut
ut
O
2/O 3: 5V 3A
%
IN
charged with 5V
adaptor
%
IN
PD QC
Thanks for choosing our products. In order to offer you a satisfied
experience, please read this manual carefully before using our
products. First time use, please use up the power, and then charge
the power bank to make sure it could work with best function.
POWERBANK VIKING PN-962PD
user manual
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Opera�on si subject to the
following two condi�ons: (1) This device may not cause harmful interference, and
(2) this device must accept any interference recived, including interference that
may cause undesired opera�on.
IMPORTANT SAFETY INSTRUCTIONS
This product is not household waste. Instead it shall be handed over to the
applicable colec�on point for the recycling of electronic equipment. To prevent
possible harm to the enviroment or human health from uncontrolled waste
disposal, dispose of rechargeable ba�ery or defec�ve device at special collec�on
points or return them to your specialist dealer or ask your local authori�es about
recycling of electronic equipment.
Opera�on Instruc�ons
%
IN OUT
5.0V 3.0A
PD QC
1) LED digital screen
displays all the contents.
3) LED digital screen
displays when charging
in
the devices which
support fast charging.
2) LED digital screen
displays when charging
in the devices with USB
5V Output or with both
USB 5V Output & fast
charging Output.
%
OUT
5.0V 3.0A
%
OUT
PD QC
%
IN
%
IN
PD QC
PN-961PD/PN-962PD are PD porta- ble power bank with Mul�-Protocol Bi-Direc�o
-
nal for fast charging, which support PPS, PD, QC, AFC, FCP, SCP, PE, SFCP, BC1.2
protocol. It's built-in rechargeable Li-ion ba�ery as energy storage. It has a Type-C
PD charge- discharge interface, which can realize the fast charging & fast dischar
-
ging func�on. There are Micro/ 'Fruit' interfaces for the charging input and the
Micro USB interface is used for fast charging in the power bank. PN-962PD has 3
Type-A USB interfaces for the discharging output, OUT1 can realize the fast
charging func�on, and the others can charge the devices with 5V 3A. PN-961PD has
dual Type-A USB outputs, each of them can realize the fast charging func�on. It has
the func�on of constant voltage and current-limi�ng. There is a Micro control Unit
(MCU) in the product with touch switch, intelligently control the charge and power
output. The built-in ba�ery is equipped with double protec�ons (hardware and
so�ware). LED digital screen can display the real �me working status of charging/
-
discharging, display accuracy of the ba�ery capacity can reach 1%.
•To start output
Power bank supports BC1.2 DCP mode. PN-962PD(OUT1) and PN-961PD
(OUT1/OUT2) realize fast charging which support QC3.0/QC2.0/AFC/FCP/SCP
/PE2.0/PE1.1/SFCP. PN-962PD has OUT2/OUT3 for discharging output with 5V/3A.
TYPE-C port realizes fast charging which support PPS/PD3.0/PD2.0/QC4+/
QC3.0/QC2.0/AFC/FCP/SCP/PE2.0/PE1.1/SFCP, When power bank is in standby
mode, the product is in the dormant period, LED digital screen switches off.
There are two ways to start discharging:
1. Automa�c iden�fica�on mode.
During standby mode, when USB OUT interface is connected with a digital device,
PowerBank can automa�cally iden�fy it, and output starts up. Meanwhile, LED
digital screen switches on and displays all the contents, indica�ng current power
and output a�er 1sec.
2. ON/OFF manual mode
When power bank is in standby mode, Slightly touch the switch bu�on twice , and
5V output power starts up. Meanwhile, LED digital screen switches on and displays
all the contents, indica�ng current power and output a�er 1sec. In considera�on of
saving energy, LED digital screen will turn off a�er it has been turned on for 40S
when Power Bank is under discharging.
To shut down output
While power bank is in discharging status, there are two ways to shut down USB
outputs:
1. Automa�c iden�fica�on mode: 40 seconds a�er the digital product is disconnec
-
ted from USB interfaces, power bank can automa�cally iden�fy it, and switch USB
outputs and LED display off.
2. ON/OFF manual mode: Double press ON/OFF can directly shut down the outputs
and switch LED display off.
To Charge Power Bank
1. Charge Power Bank with 5V adaptor:
LED digital screen displays charging status when 5V power supply
is connected to input interface (i.e. charging built-in ba�ery),
automa�cally displays all the words. A�er 1 second, displays the
actual power and charging status: the power input character of
"IN" flashes, showing the 5V
2. Charge Power Bank with QC adaptor:
LED digital screen displays charging status when QC power supply
is connected to USB inputs(i.e. charging built-in ba�ery),
automa�cally displays all the words. A�er 1 second, displays the
actual power and charging status: The power input character of
"IN" flashes and character of "PD QC" showing the fast charging
status.
3. A�er fully charged, the power input
character
of "IN" stops flashing, and capacity percentage
shows 100%.
4. When power bank
is connected with power
supply and digital devices simultaneously, the
power bank will be charged first.
There are 3 interfaces(Micro/Type-C/'Fruit') for the charging input. When three
input ports access the power at the same �me, the Type-C interface will give
priority to charge the power bank, and the other inputs will be shut down. When
Micro/'Fruit' ports access the power at the same �me, the first access will give
priority to charge the power bank, and the other input will be shut down.
•Check the power
When the power bank is changed from standby mode into working mode, LED
digital screen will be lighten up. In order to avoid power consump�on, the screen
will be switched off a�er 40S. Slightly touch the bu�on of ON/OFF once, LED
digital screen will be lighted up for 40S then, it is convenient to check the actual
power and working status. When the power bank is connected to power supply,
LED digital screen will be stay lit.
The informa�on as below is available for all models
The upper limit of charging voltage for ba�ery: 4.2V Standby Time: >5000h
Opera�ng Temperature: 0°C~40°C for discharge, 10°C~40°C for charge
Storage Temperature: -10°C~50°C Execu�ve Standard: IEC 60950-1:2005
- Over-temperature protec�on
- Output with current-limi�ng, over-current protec�on
- Release the over-current protec�on, output will recover automa�cally
- Output with constant voltage, over-voltage protec�on
- Output short circuit protec�on. Short-circuit USB output interface, to stop output
and protect the product. If the short-circuit is released, output will recover
automa�cally.
- Built-in ba�ery protec�on
- Double protec�ve func�ons for built-in ba�ery through hardware and so�ware.
Warning:
1. Ignoring following safety instruc�ons may lead to fire, electric shock, or damage
to the digital device.
2. Do not drop, short circuit, disassemble, or expose in high temperature or
in water.
3. If the ba�ery is ballooning, discharged or faulty, please stop using it immediate
-
ly.
4. Please keep it out of the reach of children.
5. Risk of explosion if ba�ery is replaced by an incorrect type.
6. Dispose of used ba�eries according to the instruc�ons.
A�en�ons: Before charging the digital devices, please make sure that the cable
and connectors are correctly connected. We recommend to use the regular
brand power adaptor to avoid damaging the digital device, because the unquali-
fied power adaptor might lead to unable charging or over charging/discharging.
BONA SPES s.r.o.
EN
