Viking MR 4082, Инструкция по эксплуатации

Страница: 81 / 420

79
DE
FR
NL
IT
ES
PT
EN
0478 193 9902 A - EN
Press the grass catcher box emptying
lever (1) forward (in direction of seat). The
grass catcher box (2) swings upwards and
the clippings fall out.
● Slowly move the grass catcher box
emptying lever towards the rear and
allow the grass catcher box to re-
engage with the rear panel.
● Press the grass catcher box emptying
lever downwards and move to the initial
position.
8.13 Grass catcher box release lever
The grass catcher box release lever is
located underneath the grass catcher box
handle.
The grass catcher box release lever must
be pulled upwards and held before
attaching or detaching the grass catcher
box.
Releasing the grass catcher box:
Pull grass catcher box release lever (1)
fully upwards and hold.
● The grass catcher box is released and
can be removed.
Locking the grass catcher box:
After attaching the grass catcher box,
release the pulled-out grass catcher box
release lever (1). Ensure that the lock
engages fully.
– Once locked, the grass catcher box is
firmly attached to the machine again.
8.14 Gearbox freewheel lever
The gearbox can be
disengaged (e.g. for
pushing the machine) or
engaged (for self-
propulsion) by means of the gearbox
freewheel lever.
Warning:
Ensure that you do not pinch your
fingers when actuating the grass
catcher box release lever.
Warning!
Risk of crush injuries!
The gearbox freewheel lever
should only be pulled out on level
surfaces, as the machine may be
set in motion.
If the machine is parked with the
gearbox disengaged, the parking
brake must always be engaged.
Note
The gearbox freewheel lever
should only be pulled out when the
ride-on mower is to be pushed.