Viking GB 460, Инструкция по эксплуатации

Страница: 66 / 656

0478 216 9905 A - EN 64
●
For hard material (e.g. tree- and hedge
cuttings) fold out the branch guide.
(
Ö
11.3)
●
Start the garden shredder. (
Ö
11.1)
●
Wait until the garden shredder has
reached its maximum speed (idling
speed).
●
Feed the garden shredder with
shredding material in the correct way.
(
Ö
9.7)
●
Switch off the garden shredder.
(
Ö
11.2)
1
2.
1
Cleaning the machine
Cleaning position of the garden
shredder:
It is only permitted to clean the machine in
the position shown.
●
Remove the feed chute. (
Ö
12.2)
The machine (engine) may be damaged if
the garden shredder is not positioned as
described.
Maintenance interval:
After each use
Clean the machine thoroughly each time it
has been used. Care of the machine will
protect it against damage and extend its
service life.
Never spray water
onto
motor or engine components,
seals, bearing points or
electrical parts such as
switches. This would result in
expensive repairs.
If you are unable to remove
the dirt and accumulated
deposits with a brush, a damp
cloth or a stick, VIKING
recommends the use of a
special cleaner (e.g. STIHL
special cleaner).
Do not use aggressive cleaning agents.
Clean the blade discs regularly.
Remove dirt from the cooling ribs, fan
wheel, area around the air filter, exhaust,
etc. to ensure that the engine is
adequately cooled.
1
2. Maintenance
Risk of injury:
Carefully read the section "For your
safety" (
Ö
4.), particularly the
subsection "Maintenance and
repairs" (
Ö
4.7), and follow all
safety instructions exactly before
performing any maintenance or
cleaning operations on the
machine.
Detach the spark plug
socket before performing
any maintenance or
cleaning operations.
If the blade discs are covered with
shredding material, use a brush or
something similar to remove this
shredding material.
Do not wipe the housing with your
hand. Risk of injury from the
blades.
22