How to Configure Viking PA-2A Overhead Paging System
To configure Viking PA-2A overhead paging system, turn on DIP switch 4 and connect the phone line to 8x8 adapter.
Learn more.
Objective
Configuring a Viking PA-2A overhead paging system for 8x8 services.
Applies To
Viking PA-2A overhead paging system
Procedure
1.
Turn ON DIP Switch 4
(OFF by default). DIP Switch 5 is ON by default.
2. Connect the phone line or RJ11 cable to your 8x8 adapter.
3. Use a wire cutter to strip the other end of the cable and attach the wires to the corresponding pins on the PA-2A:
◦
Red Wire (Ring):
Pin 5
◦
Green Wire (Tip):
Pin 6
Note
: The black and yellow wires of the cable are not used.
4. Connect the speaker or paging horn to Pins 9 and 10 on the PA-2A.
Updated: Sat, 22 Feb 2020 21:51:07 GMT
Powered by
1
