background image

 

Application Drawing 

Vi22401U Single Port 60W PoE Midspan Installation Manual

IP Camera-end Installation

The Smart Choice for Transmission Solutions                       

www.vigitron.com

Important Safety Warning

- Connect the UTP Cables (cat5/6) from the IP camera or other PoE 

powered device to the Data + PoE RJ45 connector of Vi22401U. The cable 

must be a cat5/6 with a maximum length of 100m (328 feet).

Ethernet Switch/NVR-end Installation

- Connect the UTP Cable (cat5/6) from the Ethernet switch to the Data RJ45 

connector of Vi22401U. The total length of UTP cable from network switch 

to the powered PoE device should not exceed 100m (328 feet).

- Plug the  AC power cord provided with the unit to the mains. 

 

- Read these instructions.

- Keep these instructions.

- Heed all warnings.

- Follow all instructions.

- Do not use this apparatus near water.

- Clean only with a dry cloth.

- Install in accordance with the manufacturer’s instructions.

- This installation should be made by a qualified service person and should 

  conform to all local codes.

- DO NOT bundle UTP signal wires in the same conduit as high-voltage

  wiring.

- To reduce the risk of fire or electrical shock, do not expose these products 

  to rain, moisture, dripping or splashing.

- No objects filled with liquids, such as vases, shall be placed on Vigitron

  equipment.

- DO NOT install the unit in a place where the operating ambient 

  temperature exceeds 75°C.

- Make sure that the external power supply output voltage is in the recom

  mended range. 

- Do not install near any heat sources such as radiators, heat registers, 

  stoves or other apparatus that produce heat.

- Protect the power cord from being walked on or pinched particularly at 

  plugs, convenience receptacles, and the point where they exit from the 

  apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long 

  periods of time.

- Refer all servicing to qualified service personnel. Servicing is required

  when the apparatus has been damaged in any way, such as a power 

  supply cord or plug is damaged, liquid has been spilled, or objects have

  fallen into the apparatus, the apparatus has been exposed to rain or 

  moisture, does not operate normally, or has been dropped.

- The mains plug is used as the disconnect device and shall remain readily

  operable.

         WARNING! - To reduce the risk of fire or electric shock, do not expose 

this apparatus to rain or moisture. This apparatus shall not be exposed to 

dripping or splashing and no objects filled with liquids, such as vases shall 

be placed on the apparatus.
         WARNING! - This apparatus is a Class I product. This product must 

be connected to a mains socket outlet through an AC to DC Power supply 

when using DC input.
         WARNING! - The mains plug is used as the disconnect device and 

shall remain readily operable. 

The MaxiiPower Model 

Vi22401U is a unique Single port PoE Midspan 

designed for the most demanding power applications of 10/100/1000 

Base-T networks. With the ability to provide up to 60W PoE power, it is the 

most cost effective method for powering PTZ domes cameras with heaters 

and blowers. The Midspan is compliant  IEEE 802.3af, at, bt class 0-6 

standards and UPoE up to 60W PoE application. Its unique control system 

enables it to handle both single PD and dual PD PoE devices. 
This Midspan is equipped with LEDs to provide power status. No IP setting 

or configurations are required and it can completely transparent to the 

Ethernet network and higher layer protocols.   

 Ethernet Extenders

TM

DO NOT OPEN

RISK OF ELECTRIC SHOCK

CAUTION

CAUTION: 

TO REDUCE THE RISK OF ELECTRICAL SHOCK,

                   DO NOT REMOVE COVER. NO USER SERVICEABLE

                   PARTS INSIDE. REFER SERVICING TO QUALIFIED

Coax

Cat 5/6

Powering PoE devices at standard and extended distances

The Vi22401 can power a wide range of PoE devices at standard and extended 

distances up to 60W.

Data + 

PoE

Extended UTP

Data

Data

Data

Data

Data

Data + 

PoE

Extended Coax

Data + 

PoE

328 ft. (100m) 

Data + 

PoE

328 ft. (100m) 

Vi2401A

Vi2401A

Vi2301A

Vi2301A

LED Light

60W PTZ Dome

IP Phone

Data +

 PoE

328 ft. (100m)

Data +

 60W PoE

328 ft. (100m)

Data +

 60W PoE

328 ft. (100m)

Data +

 PoE

328 ft. (100m)

Data +

 PoE

328 ft. (100m)

Data +

 PoE

328 ft. (100m)

IP Cameras

IP Cameras

Vi22401

Vi22401

Vi22401

Vi30005

Vi22401

Data +

 60W PoE

328 ft. (100m)

Vi22401

Network Switch

Отзывы: