Application Drawings
Vi3205 5-Port L2 Extended Coax PoE Switch Installation Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IP Camera-end Installation
The Smart Choice for Transmission Solutions
www.vigitron.com
Vigitron’s MaxiiNet™ Vi3205 fixed managed 5-port PoE switch brings new
performance standards to the growing need for high speed transmission of
high speed Ethernet and PoE. The Vi3205 is powered by Vi1120 120W
power supply and can provide up to 37W to each of its 4 standard Ethernet
ports.
The Vi3205’s uplink can operate on coax at extended distances up to 3,000
feet. When using Coax uplink it can receive PoE power from the headend to
power itself eliminating the need for a local power source.
With an operating temperature range of -30°C to 75°C, the Vi3205 is the
perfect solution for data and power transmission for aplications such as
warehouses, parking lots, campuses, casinos. The Vi3205 is MegaPixel
Certified (MPC™), type tested to network packet performance standards to
assure you an error free and quality operation. Fixed managed L2 functions
includes 802.1p QoS, support of 2k MAC addressing, learning, aging, and a
non-blocking switch fabric.
The built-in PSE provides 802.3af/at up to 37W per port while providing all
safety features of standard PoE. Installation cost savings, proven perfor-
mance, and major camera manufacturer compatibility all go into making
Vigitron’s MaxiiNet™ Vi3205 an ideal solution for IP video and PoE
transmission.
Important Safety Warning
Ethernet Switch/NVR-end Installation
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform to all local
codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,
dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient temperature exceeds 70°C
or
is below - 10°C.
- Make sure that the external power supply output voltage is in the recommended range.
- Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at power source,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
- The main plug is used as the disconnect device and shall remain readily operable.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
PoE Switches
MaxiiNet
™
Coax Uplink Connection:
- Connect one end of the extended Coax cable to the Coax connector of
Vi3205.
Standard Ethernet Ports:
- Connect a standard Cat5, or better, UTP cable of maximum 328 feet
(100m) to one of the Ethernet ports. The ports will automatically configure
as 10 or 100BaseT depending on the connected camera.
Power Supply:
-Connect a power supply to the power input of Vi3205. If there is no need
for providing PoE on 4 ports a 12VDC power supply such as Vi0012 will be
sufficient. If PoE is required at the ports you need to use a 48-57VDC
power supply such as Vi1120 that can provide maximum PoE capacity on
all 4 ports.
The Vi3205 can receive data over extended distance Coax up to 3,000 ft. and power 60W
PoE cameras using the Vi0015 combiner cable and a local power supply.
3,000 ft. (914 m) Coax
Data
Cat5/6
Data + PoE
Cat5/6
Data + PoE
Vi3205
IP Cameras
Vi1120
Vi3326
Cat5/6
Data
Network
Switch
Vi2401A
12VDC
Vi3026
Cat5/6
Data
Vi2401A
60W PTZ Dome
Cat5/6
Data &
60W PoE
The Vi3205 can receive data over extended distance Coax up to 3,000 ft. and power 4 PoE
cameras using local power supplies.
3,000 ft. (914 m) Coax
Data
Vi3205
Vi1120
Vi3326
Cat5/6
Data
Network
Switch
Vi2401A
12VDC
Cat5/6
Data + PoE
Cat5/6
Data + PoE
Cat5/6
Data + PoE
Cat5/6
Data + PoE
IP Cameras
The Vi3205 can receive data and PoE power for powering itself over extended distance
Coax up to 3,000 ft.. The cameras use local power supplies.
3,000 ft. (914 m) Coax
Data + PoE
Vi3205
PoE
Switch
Cat5/6
Data
Cat5/6
Data
Cat5/6
Data
Cat5/6
Data
IP Cameras
Vi2616
The Vi3205 can receive data and PoE power for powering itself over extended distance
Coax up to 3,000 ft.. The cameras use local power supplies.
3,000 ft. (914 m) Coax
Data + PoE
Vi3205
Vi3326
Network
Switch
Cat5/6
Data
Cat5/6
Data
Cat5/6
Data
Cat5/6
Data
IP Cameras
Use a Vi24xxA series extender to connect extended Coax to the network
switch. The Remote/Local switch should be set to Local.
Extended Coax connection:
- Connect one end of the extended Coax cable to the BNC connector of a
Vi24xxA series extender.
Standard Ethernet connection:
- Connect the RJ45 connector of the Ethernet switch to the 10/100BaseT
Ethernet port of Vi24xxA using a standard Cat5/6 cable of maximum 328 feet
(100 m).
Power Supply:
- Connect the 12V power supply to the power connector of the Vi24xxA.
When using Vi2401A and have PoE available it will use PoE if external
power supply is not connected.
