Vigitron MaxiiNet Vi30126 Series, Руководство по эксплуатации

Страница: 43 / 126

Page | 43
Power Mode:
Select Mode by:
Host: Power provided will be determined by connected device.
Class: Power is determined by power class of connected device limited to
that power class.
Host defined Power Limit: Power is determined by port setting, which can
be any variable within the range of the selected class power.
Class defined Power Limit: Power is defined by the upper limit of the
selected class.
Intelligent Power Limit: Power is determined by the connected device.
Auto Recovery: If PoE is lost, restart will be determined by this setting.
10.1 PoE Setting
1.
Select Port.
2.
Select Enable/Disable.
3.
Select class as Either AF or AT.
4.
Input the PoE power level.
5.
Select Update: Actual status will be displayed in chart below.