
196
Chapter 4: Security
4
-
1 Source Guard
4
-
1.1 Configuration
This chapter describes all of the switch security configuration tasks to enhance the
security of local network including IP Source Guard, ARP Inspection, DHCP Snooping,
AAA, and so on
.
The section describes the IP Source Guard detail parameters of the switch. You could
use the IP Source Guard configuration to enable or disable with the port of the
switch.
This section describes how to configure IP Source Guard setting including:
Mode (Enabled and Disabled)
Maximum Dynamic Clients (0, 1, 2, Unlimited)
Web Interface
To configure an IP Source Guard Configuration in the web interface:
1.
Select “Enabled” in the mode of IP Source Guard Configuration.
2.
Select “Enabled” of the specific port in the mode of Port Mode
Configuration.
3.
Select Maximum Dynamic Clients (0, 1, 2, Unlimited) of the specific port in
the Mode of Port Mode Configuration.
4.
Click “Apply”.
Figure 4-1.1: The IP Source Guard Configuration