173
3
-
15.10 QoS
Control List
Configuration
The section shows the QoS Control List(QCL), which is made up of the QCEs. Each
row describes a QCE that is defined. The maximum number of QCEs is 256 on each
switch. Click on the lowest plus sign to add a new QCE to the list.
Web Interface
To configure the QoS Control List parameters in the web interface:
1.
Click Configuration, QoS, QoS Contol List.
2.
Click the
to add a new QoS Control List.
3.
Scroll all parameters and evoke the Port Member to join the QCE rules.
4.
Click “Save” to save the setting.
5.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
Figure 3-15.10: The QoS Control List Configuration
