Vi00023 Wireless IP Camera Installation Tool w/Removable PoE Power Bank User Manual
Application Drawing
Important Safety Warning
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The Vi00023 Setup
WiFi Connection
Wired Connection
The Smart Choice for Transmission Solutions
www.vigitron.com
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Use in accordance with the manufacturer’s instructions.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
true exceeds 75° C.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The network cable is used as the disconnect device and shall remain
readily operable.
Vi00023_UM
- Connect the “Network” port (RJ45) on the side of Vi00023, to your laptop or
Network using a standard Cat5/6 network cable. This will establish a wired
connection between the IP camera, laptop or network, and the Vi00023.
Note: Make sure that your laptop shares a same subnet as your IP camera
by checking Laptop IP Address.
Cat 5/6
Max
ii
View
TM
- Slide the power switch to “ON” position to turn on the Vi00023.
- The OLED display will illuminate and show Vigitron Logo.
- The OLED display will then show camera power usage, voltage, and the
Vi00023 battery level.
- The blue WiFi LED will lit after 20 seconds to indicate WiFi is “ON”.
- Connect a Cat5/6 network cable to the RJ45 connector of the IP camera.
- Connect the other end of the network cable to Cat5/6 network cable to the
“Camera” port of Vi00023.
Use only the provided fast charger for charging battery. It can fully charge
the battery with in 3 hours. The charging port is a Barrel Connector located
on the battery pack.
The Vi00023 removable batteries can be charged either connected to the
Vi00023 or stand alone.
- Open the network or wireless settings on your laptop or mobile device.
• Apple devices: Choose Settings > Wi-Fi
• Android devices: Choose Settings > Wireless & Networks > Wi-Fi
• Windows devices: Enable the wireless connection.
- Select Vi00023-xxxxxx from the list of networks where “xxxxxx” is a unique
value for each device.
- Select the manual button, enter and then save an IP Address (with same
subnet as your IP camera) and Subnet Mask that will allow access to the
IP camera. This will establish a wireless connection between your WiFi
device and the Vi00023.
- Open the web browser:
• Enter the IP address of the camera on the address bar.
• View camera image, focus and setup the view.
- The Blue Status LED on the top panel of Vi00023 should be flashing to
indicate proper WiFi connection.
Vigitron's patent pending Vi00023 wireless camera setup tool offers a fast
and reliable method for focusing and adjusting the view of IP cameras in the
field. The connected IP camera image is transmitted through both WiFi and
wired connection allowing for quick in-field view of image on cell phones,
tablets or laptops.
The Vi00023 has a rechargeable and removable battery that provides
power to the unit and the connected camera.
Its built in Midspan is compliant to IEEE 802.3af/at and provides up to 36W
PoE power. It also displays PoE voltage and power consumed by the
camera.
A 5V @1.5A USB port is provided for charging smart Phones and Tablets
on site.
A DC power output provides a 12VDC @ 1.5A for powering non PoE
devices.
The Vi00023 is very compact and light and can easily fit in a pocket. The
carrying strap makes it easy to operate hands-free.
The Vi00023 enables connecting the PoE cameras to any wireless device using a WiFi connection.
The Vi00023 enables connecting the non PoE cameras to any wireless device using a WiFi connection.
Providing PoE and WiFi Connection to a Camera
Data
+ PoE
328 ft. (100m)
Vi00023
PoE Camera
Providing DC Power and WiFi Connection to a Camera
Data
328 ft. (100m)
Vi00023
IP Camera
12V DC
