8 / 19
6.2 1U Rack Mounting
This transceiver also can be mounted in a standard 1U rack (up to 4 units can
be installed horizontally). The mounting steps are as follows:
Step 1:
Stack two transceivers on top of each other, then use included screws
to fix two 1U rack panels on the transceivers, as shown in the figure below:
Step 2:
Fix two 1U rack panels on another two stacked transceivers in the
same way, then use screws to fix two 1U rack panels together, as shown in
the figure below:
Step 3:
Fasten screws between two 1U rack panels, so that four transceivers
are mounted in a 1U rack, as shown in the figure below:
