Operation Manual
VIGSB Wireless
Smart Bulb
Pa
i
ring and Connecting
the
Smart Bulb with
the
System.
1.
Disconnect the power supply before install
ing
the bulb.
2.
When you turn on the power, the bulb will turn on with a white light and
then begin flashing rapidly while waiting for your pairing.
3.
Open the App, t
ap
"Add Accessory" on
the main screen or under
"System
Settings".
4.
Select "Learn mode" to pair the device.
5.
Make sure the bulb is flashing rapidly, you can also make the bulb flash
rapidly by turning On and Off the power 3 times.
6.
Configure the networking of the bulb under the guideline animation.
7.
Name it,
press
"Save", the pairing result would be confirmed in App and the
bulb will stop flashing.
