TSFC 12-2 User Manual
Vighnaharta Technologies Pvt. Ltd. Page
22
of
26
3.
Disabled:
This mode is used to disable the zone. The system does not scan the input
signal from smoke detectors, heat detectors, etc.
3.1.3
NAC
After entering in the
NAC
configuration
menu, LCD will show below screen,
Use
LEFT
and
RIGHT
keys to
ENABLE/DISABLE
NAC output. After
changing the mode, press
ENTER
key to save the changes.
3.1.4
NAC Auto Silence
NAC auto silence feature is used to SILENCE siren automatically after pre defined time. If NAC
auto silence feature is set as a DISABLE, SIREN will not turn OFF till panel is RESET.
Use
LEFT
and
RIGHT
keys to
ENABLE/DISABLE
NAC output. After
changing the mode, press
ENTER
key to save the changes. By default it is enabled.
NAC silence
time set as a 10min and is not user editable.
3.1.5
Auto Key Lock
This function is used to LOCK panel keypad automatically after completion of Auto Key Lock
timer. If this menu is set as a DISABLE panel keypad will not get locked. By default it is set
as a DISABLE.
Auto key lock timer is set as 3 minutes and is not user editable.
Use
LEFT
and
RIGHT
keys to
ENABLE/DISABLE
Auto Key Lock function.
After changing the mode, press
ENTER
key to save the changes.
3.1.6
Password Change
This function is used to SET keypad password. Without entering password user cannot enter
the MENU function. By default it is set as “1111”.
If user want to change keypad password please follow below steps,
NAC
< ENABLE >
NAC Auto Silence
< ENABLE >
Auto Key Lock
< DISABLE >
PASSWORD
CHANGE
