background image

68

Maintenance

General Precautions

• 

Make sure the monitor is turned off and the power cable is unplugged from the 

power outlet.

•  Never spray or pour any liquid directly onto the screen or case.
• 

Handle the monitor with care, as a darker-colored monitor, if scuffed, may show 

marks more clearly than a lighter-colored monitor.

Cleaning the Screen

• 

Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other 

particles.

• 

If the screen is still not clean, apply a small amount of non-ammonia, non-

alcohol based glass cleaner onto a clean, soft, lint-free cloth; then wipe the 

screen.

Cleaning the Case

• 

Use a soft, dry cloth.

• 

If the case is still not clean, apply a small amount of non-ammonia, non-alcohol 

based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe 

the surface.

Disclaimer

•  ViewSonic® does not recommend the use of any ammonia or alcohol-based 

cleaners on the display screen or case. Some chemical cleaners have been 

reported to damage the screen and/or case of the monitor.

• 

ViewSonic® will not be liable for damage resulting from use of any ammonia or 

alcohol-based cleaners.

Содержание XG270QC

















































































Отзывы: