10
Wall Mounting
NOTE:
Only use UL Certified wall mount kits.
75 mm
VGA
DC IN
-
75 mm
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Loading
Hole pattern
(W x H)
Interface Pad
(W x H x D)
Pad Hole
Screw Specification
& Quantity
14 kg
75 x 75 mm 115 x 115 x 2.6 mm Ø 5 mm
M4 x 6 mm
4 pieces
NOTE:
Wall mount kits are sold separately. To obtain a wall mounting kit,
contact ViewSonic® or your local dealer.
1.
Turn off the device and disconnect all cables.
2.
Place the device on a flat, stable surface with the screen facing down.
3.
Remove the monitor stand.
1
VGA
DC_
IN
HDM
I
2
VGA
DC_
IN
HDM
I
4.
Attach the mounting bracket to the VESA mounting holes at the rear of the
device. Then secure it with four (4) screws (M4 x 6 mm).
5.
Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
