15
Touch Function Control
Before using the touch function, ensure the USB Type B to Type A cable is
connected to your computer and the Windows operating system is running.
When using the touch function, please note:
•
The touch function may need about five (5) seconds to resume if the USB
cable is removed and plugged in again, or the computer resumes from
Sleep Mode
.
•
The touchscreen can only detect up to ten (10) fingers simultaneously.
•
If the Windows’ cursor does not accurately follow your finger when you
touch the screen, do the following:
1.
Open:
Control Panel
>
Hardware and Sound
>
Tablet PC Settings
2.
Select
Calibration
.
3.
Follow the instructions to recalibrate your screen.
