37
3D functions
This projector also comes with 3D functions that offer greater depth and immersion
when viewing 3D movies, videos, sports, and games. You would need a pair of 3D
glasses when viewing 3D images and videos.
If the 3D signal comes from an HDMI 1.4a compatible device, this projector will look
for a 3D Sync data signal. Once detected, the projector will automatically switch to
3D projection. Under other circumstances, you may need to manually select the 3D
Sync format to ensure that the proper projection of 3D images.
Selecting 3D Sync formats:
1.
Use the 3D button on the remote control to enter the
3D Settings
menu or enter
Advanced
>
3D Settings
menu.
2.
Press [Enter] to bring up the
3D Settings
page.
Once 3D Sync function has been activated:
•
Brightness of the projected image will be reduced.
•
Color modes cannot be adjusted.
•
Zoom functions can only enlarge the image to a limited degree.
If the 3D image has been severely inverted, you may set the 3D Sync Invert function to [Invert]
to correct this problem.
Switch off the projector
1. Press the
Power button. A confirmation message will be displayed on screen. The
message will disappear if you do not respond within a few seconds.
2. Press the
Power Button again, and the projector is turned off. Wait until the fan is
completely stopped and unplug the power cord.
3.
Disconnect the power cord from the wall socket if the projector will not be used in an
extended period of time.
Содержание PX702HD
Страница 78: ......
