ViewSonic PX701HD Скачать руководство пользователя страница 81

Страница: 81 / 89

Copyright Informa�on

Microso�, Windows, and the Windows logo are registered trademarks of Microso�

Corpora�on in the United States and other countries.

ViewSonic® and the three birds logo are registered trademarks of ViewSonic®

Corpora�on.

VESA is a registered trademark of the Video Electronics Standards Associa�on.

DPMS and DDC are trademarks of VESA.

Disclaimer:

ViewSonic® Corpora�on shall not be liable for technical or editorial

errors or omissions contained herein; nor for incidental or consequen�al damages

resul�ng from furnishing this material, or the performance or use of this product.

In the interest of con�nuing product improvement, ViewSonic® Corpora�on

reserves the right to change product speciﬁca�ons without no�ce. Informa�on in

this document may change without no�ce.

No part

this

document

may

copied,

reproduced,

transmi�ed

any

means,

for any purpose without prior wri�en permission from ViewSonic® Corpora�on.

PX701HD_UG_ENG Rev. 1A 03-18-19

Содержание PX701HD


























































































Результаты поиска

Содержание PX701HD

Отзывы:

Бренды по названию

Популярные бренды

ViewSonic PX701HD, Руководство пользователя

Результаты поиска

Содержание PX701HD

Отзывы:

Бренды по названию

Популярные бренды