ViewSonic PJD6252L, Руководство пользователя, Страница: 36 / 95

31
4. 16:10 (PJD6551W/PJD7526W): Scales an
image so that it is displayed in the center of the
screen with a 16:10 aspect ratio. This is most
suitable for images which are already in a 16:10
aspect, as it displays them without aspect
alteration.
5. Panorama (PJD6551W/PJD7526W/
PJD7720HD): Scales a 4:3 image vertically and
horizontally in a non-linear manner so that it
fills the screen.
6. 2.35:1 : Scales an image so that it is displayed in
the center of the screen with a 2.35:1 aspect
ratio without aspect alteration.
7. Anamorphic (PJD6551W/PJD7526W/
PJD7720HD): Scales a 2.35:1 aspect image so
that it fills the screen.
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
• Press Color Mode repeatedly until your desired mode is selected.
• Go to the PICTURE > Color Mode menu and press / to select a desired mode.
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1. Brightest mode : Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2. Dynamic mode : Is designed for presentations under daylight environment to match
PC and notebook coloring. In addition, the projector will optimize the image quality
using the dynamic PC function in accordance with the projected contents.
16:10 picture
4:3 picture
2.35:1 picture
2.35:1 picture