54
Resetting the filter timer
5. Open the OSD menu and go to the
SYSTEM SETTING: ADVANCED
>
Filter
Settings
menu.
6. Press
Enter
and the
Filter Settings
page is displayed.
7. Highlight
Reset Filter
Hours and press
Enter
. A warning message is displayed
asking if you want to reset the filter timer.
8. Highlight
Reset
and press
Enter
. The lamp timer will be reset to '0'.
Caution
• Remember to use Filter Mode to Off in the SYSTEM SETTING: ADVANCED > Filter
Settings menu when using the projector with the dust filter removed. Setting Filter Mode
to Off does not reset the filter timer. The timer will continue counting the next time you
fit the filter back on and set Filter Mode to On.
Installing the cable management cover (optional
accessory)
1. Make sure that all the cables are properly connected to the projector.
2. Attach the cable management cover to the back of the projector.
3. Tighten the screws that secure the cable management cover.
