30
To activate the
High Altitude Mode
:
1.
Open the OSD menu and go to the
SYSTEM
SETTING: ADVANCED
>
High Altitude
Mode
menu.
2.
Press
/
to select
On
. A confirmation
message is displayed.
3.
Highlight
Yes
and press
Enter
.
Operation under "
High Altitude Mode
" may cause a
higher decibel operating noise level because of increased fan speed necessary to improve
overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to
High Altitude Mode
to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
Using the 3D functions
This projector features 3D function which enables you to enjoy 3D movies, videos, and
sporting events in a more realistic way by presenting the depth of the images. You need to
wear a pair of 3D glasses to view 3D images.
If the 3D signal is input from an HDMI 1.4a compatible device, the projector detects the
signal for
3D Sync
information and once detected, it projects images in 3D format
automatically. In other cases, you may need to manually select a
3D Sync
format for the
projector to project 3D images correctly.
To select a
3D Sync
format:
1.
Press
3D
on the remote control to access the
3D Settings
menu or go to the
SOURCE
>
3D Settings
menu.
2.
Press
Enter
and the
3D Settings
page is displayed.
3.
Highlight
3D Sync
and press
Enter
.
4.
Press
to select a
3D Sync
setting and then press
Enter
to confirm.
When the 3D Sync function is on:
•
The brightness level of the projected image will decrease.
•
The Color Mode cannot be adjusted.
•
The Zoom function can only magnify the pictures to limited sizes.
If you discover the inversion of the 3D image depth, set the 3D Sync Invert function to “Invert”
to correct the problem.
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure you have turned on the corresponding menus under
SOURCE
>
Standby Settings
, and the cable connections are correctly made. For the
connection methods, see the
chapter.
Active VGA Out
Selecting
On
outputs a VGA signal when the
COMPUTER IN 1
and
COMPUTER OUT
sockets are correctly connected to devices. The projector outputs the signal received only
from
COMPUTER IN 1
.
Active Audio Out
We recommend you use the High Altitude
mode by selecting it whenever your
environment is higher than 1500 m.
Yes
No
Notice
Do you want to turn High Altitude
Mode ON?
Содержание PJD5351LS
Страница 72: ......
