ViewSonic PJ650 страница 45 Скачать руководство пользователя

Страница: 45 / 46

ViewSonic PJ650

Compliance Information for U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:
• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning

To assure continued FCC compliance, the user must use grounded power supply cord and the provided

shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a

shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this device.

Instructions to Users

This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that

the following condition is met.

Use the cables which are included with the projector or specified.

Compliance Information for Canada

Notice:

This class B

digital apparatus complies with Canada ICES-003.

AVIS:

Cet appeil numerique de la Classe B conforme a la norme NMB-003 du Canada.

Compliance Information for European Countries

CE Conformity

The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/

31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as

amended by 93/68/EEC Art.13 with regard to “Safety.”

User Information for all Countries

NOTICE:

Use the cables which are included with the projector or specified.

Содержание PJ650















































Результаты поиска

Содержание PJ650

Отзывы:

Похожие инструкции для PJ650

Бренды по названию

Популярные бренды

ViewSonic PJ650, Руководство пользователя

Результаты поиска

Содержание PJ650

Отзывы:

Похожие инструкции для PJ650

Бренды по названию

Популярные бренды