ViewSonic PJ1158-1 страница 38 Скачать руководство пользователя

Страница: 38 / 106

6-13 Regarding the indicator lamps

Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the

meanings as described in the table below. Please respond in accordance with the instructions within the

table.

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Lighting

In Orange

Turned

off

Turned

off

The projector is in a standby state.

Blinking

In Green

Turned

off

Turned

off

The projector is warming up.

Please wait.

Lighting

In Green

Turned

off

Turned

off

The projector is in an on state.

Ordinary operations may be performed.

Blinking

In Orange

Turned

off

Turned

off

The projector is cooling down.

Please wait.

Blinking

In Red

(discre-

tionary)

(discre-

tionary)

The projector is cooling down. A certain error has been detected.

Please wait until the POWER indicator

nishes blinking, and then perform the proper

measure using the item descriptions below.

Blinking

In Red

Lighting

In Red

Lighting

In Red

Turned

off

The lamp does not light, and there is a possibility that interior portion has

become heated.

Please turn the power off, and allow the projector to cool down at least 20 minutes.

After the projector has suf

ciently cooled down, please make con

rmation of the

following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air

lter dirty?

• Does the peripheral temperature exceed 35ºC?

If the same indication is displayed after the remedy, please change the lamp referring

to the section “Lamp”.

Blinking

In Red

Lighting

In Red

Blinking

In Red

Turned

off

The lamp cover has not been properly

xed (attached).

Please turn the power off, and allow the unit to cool down at least 45 minutes. After

the projector has suf

ciently cooled down, please make con

rmation of the attachment

state of the lamp cover. After performing any needed maintenance, turn the power on

again.

Blinking

In Red

Lighting

In Red

Turned

off

Blinking

In Red

The cooling fan is not operating.

Please turn the power off, and allow the unit to cool down at least 20 minutes. After

the projector has suf

ciently cooled down, please make con

rmation that no foreign

matter has become caught in the fan, etc., and then turn the power on again.

If the same indication is displayed after the remedy, please replace a fan.

Blinking

In Red

Lighting

In Red

Turned

off

Lighting

In Red

There is a possibility that the interior portion has become heated.

Please turn the power off, and allow the unit to cool down at least 20 minutes. After

the projector has suf

ciently cooled down, please make con

rmation of the following

items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air

lter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy, please set the FAN SPEED of the

SERVICE item in the OPTION menu to HIGH.

Lighting

In Green

Alternative

blinking in Red

There is a possibility that the interior portion has become overcooled.

Please use the unit within the usage temperature parameters (5°C to 35°C). After

the treatment, resent the power to ON. If the same indication is displayed after

the treatment, please make sure that the proper cables are connected to each of

connectors E301, E302 and E304 on the PWB assembly MAIN.

Lighting

In Green

Simultaneous

blinking in Red

It is time to clean the air

lter.

Please immediately turn the power OFF, and clean or change the air

lter referring to

the section “Air Filter”. After cleaning or change the air

lter, please be sure to reset

the

lter timer. After the remedy, resent the power to ON.

Blinking in

Green for

approx. 3

seconds

Turned

off

Turned

off

At least 1 "Power ON" schedule is saved to the projector.

(Please refer to the User's Manual Network Functions: Schedule Settings for more

information)

NOTE

• When the interior portion has become overheated, for safety purposes, the power source is automati-

cally turned off, and the indicator lamps may also be turned off. In such a case, press the “

○

” (OFF) side of the

power switch, and wait at least 45 minutes. After the projector has suf

ciently cooled down, please make con-

rmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

ViewSonic

Corporation

nfidential

Not

Copy

PJ1158-1

Содержание PJ1158-1











































































































Результаты поиска

Содержание PJ1158-1

Отзывы:

Похожие инструкции для PJ1158-1

Бренды по названию

Популярные бренды

ViewSonic PJ1158-1, Руководство по обслуживанию

Результаты поиска

Содержание PJ1158-1

Отзывы:

Похожие инструкции для PJ1158-1

Бренды по названию

Популярные бренды