manualshive.com logo in svg

ViewSonic PJ1158-1, Руководство по обслуживанию, Страница: 26 / 106

Поделиться
Скачать
ViewSonic PJ1158-1 Скачать руководство пользователя страница 26

3. Maintenance point

Each color part has same construction.
By using swab and air duster, you can 
easily remove dust from panel and opti-
cal filter.

4. Cleaning the panels and optical filters

    (1) Turn on the set and lit on the lamp.
    (2) By using swab and air duster, remove the dust. Focusing dust makes you check the dust on screen.

• While removing the dust, separated dust will 

be blown off by air cooling system.

• Please pay attention not to damage panels 

and optical filters.

5. Re-assembly

(1) Turn off the set and unplug the power cord.
(2) Remove an insulator from S941.
(3) Screw down the PWB assembly MAIN and connect the LCD panel flexible cables to the PWB assembly MAIN.
(4) Re-assemble the set.
(5) While re-assembling, please clean the intake filter by using a vacuum cleaner.

Swab

Panel

Holder

Optical filter

Air

Swab

Panel

Holder

Optical filter

 

 

 

ViewSonic 

Corporation

Co

nfidential

 

- 

Do 

Not 

Copy

 

 

 

 

PJ1158-1

23

Содержание PJ1158-1











































































































Отзывы:

Нет отзывов