27
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the
Brightness
setting to suit your selected
input and viewing environment.
Adjusting Color
Go to the
IMAGE
>
Advanced
>
Color
menu and press
/
.
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
This function is only available when the input signal is Video, YPbPr or YCbCr.
Adjusting Tint
Go to the
IMAGE
>
Advanced
>
Tint
menu and press
/
.
The higher the value, the more greenish the picture becomes. The lower the value, the more
reddish the picture becomes.
This function is only available when the input signal is Video, YPbPr or YCbCr.
Adjusting Sharpness
Go to the
IMAGE
>
Advanced
>
Sharpness
menu and press
/
.
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
This function is only available when the input signal is Video, YPbPr or YCbCr.
Adjusting Brilliant Color
Go to the
IMAGE
>
Advanced
>
Brilliant Color
menu and press
/
.
This feature utilizes a new color-processing algorithm and system level enhancements to
enable higher brightness while providing truer, more vibrant colors in the projected picture.
It enables a greater than 50% brightness increase in mid-tone images, which are common in
video and natural scenes, so the projector reproduces images in realistic and true colors. If
you prefer images with that quality, select a level that suits your need. If you don’t need it,
select
Off
.
Reducing image noise
Go to the
IMAGE
>
Advanced
>
Noise Reduction
menu and press
/
.
This function reduces electrical image noise caused by different media players. The higher
the setting, the less the noise.
This function is only available when a PC or Video input signal is selected.
Selecting a gamma setting
Go to the
IMAGE
>
Advanced
>
Gamma
menu and select a preferred setting by pressing
/
.
Gamma refers to the relationship between input source and picture brightness.
Selecting a Color Temperature
Go to the
IMAGE
>
Color Temp.
menu and press
/
.
The options available for color temperature settings vary according to the signal type
selected.
-30
0
+40
Содержание PG703W
Страница 85: ......
