ViewPlus VP Columbia VPTT2113-01, Руководство пользователя

Страница: 11 / 43

10
o
Also, if any damage occurred during shipping, most shipping companies require the box and the
packing material in order to settle the insurance claim.
o
For further embosser setup also follow the VP Columbia Setup Instructions included with your
other materials.
B. Cable Attachment
Power connection
On the back of the VP Columbia embosser you find a power module with a power socket, on/off switch,
and a compartment holding one fuse. A sticker above the power module indicates what specific fuse is
required for the embosser. If the embosser will not power on, it might be necessary to replace the fuse.
Shows the power module in the back of the embosser
Insert the power cable plug into the VP Columbia power connector and the other end of the power cable
into a grounded outlet or a surge protector (recommended).
Turn the embosser on by pressing the power switch to the 'I' position. When facing the embosser from
the front, the 'I' position of the switch is towards the left side.