ViewPlus VP Columbia VPTT2113-01, Руководство пользователя

Страница: 10 / 43

9
III. Printer Setup
A. Unpacking
o
Remove the embosser and all its accessories from its packaging.
Besides the embosser, the package should include power cord, USB cable, Warranty Card, Braille
Setup Instructions and a USB flash drive containing printer driver, user manual and other
documentation.
o
Inspect the ViewPlus embosser and its packaging for any damage. If noticeable damage occurred,
please report to your ViewPlus product supplier immediately.
o
Save the packing material and box. The packing material must be used to ship the ViewPlus
embosser for warranty maintenance service.
o
Remove shipping lockout screw by opening the top lid of the embosser and taking out the thumb
screw as indicated in the picture below. Store the thumb screw behind the metal latch against the
right side frame as indicated in second picture below.
Shows thumb screw for carriage lock during shipping
Shows how to store the thumb screw
o
Before packing up the embosser again for shipping, make sure to re-install the thumb screw for
carriage lockout properly! Please make sure, the thumb screw is installed properly, and the
embosser is secured with the specific VP Columbia foam end caps during shipping, otherwise your
warranty will be voided.