Viessmann VITOWELL EASY D1, Руководство по эксплуатации

Страница: 8 / 20

Test Operation
Test Run
Before switching ON electricity supply,
please check the electrical wiring
connection properly to the Electric
Water Heater.
Starting Mode
The icons will blink twice (infinity, pump,
two white dot led)
When the 3 in 1 Stop Valve is
turns on
Last used setting will be activate if the 3
in 1 Stop Valve is turned on.
When 3 in 1 Stop Valve is turned off,
Electric Water Heater goes to
pre-standby.
If the 3 in 1 Stop Valve is not turned
ON, after 5 minutes will go to standby
mode.
Changing Temperature Manually
The temperature can be gradually
controlled by pressing either UP or
DOWN button.
Press UP button
Temperature increases.
Press and hold UP button for 2
sec.
Temperature increases at faster speed
up to the maximum 45ºC.
Press DOWN button.
Temperature decreases.
Press and hold DOWN button for
2 sec.
Temperature decreases at faster speed
down to 32ºC and stop autoscroll.
If the setting reached 32ºC, presses
DOWN button one more time will
trigger the cold water function.