Viessmann Vitovalor PT2, Руководство по эксплуатации

Страница: 34 / 56

34
You can select one of the following displays as the
default display:
■ "Heating"
■ "DHW"
■ "System overview"
■ "Energy cockpit"
■ "Favourites"
Tap the following on-screen buttons:
1.
2. "Settings"
3. "Selecting the default display"
4. Required display
5. to confirm
Note
If you tap , the selected display will appear.
Enabling Low power radio
You can remotely control your system using a Vitotrol
300-E via the "Low power radio". To do this, enable
"Low power radio" and establish a connection with
your remote control unit.
Tap the following on-screen buttons:
1.
2. "Settings"
3. "Low power radio ON/OFF"
4. "ON"
5. to confirm
Enabling WLAN
Switching internet access ON or OFF
You can control your micro CHP system remotely via
the internet using an app. Enable the WLAN internet
interface and establish an internet connection. The
access code required for commissioning can be found
on the label affixed to the control unit, close to the pro-
gramming unit. Stick the access code in these operat-
ing instructions so that you can find it again when you
need it.
Fig. 12
Tap the following on-screen buttons:
1.
2. "Settings"
3. "Internet ON/OFF"
4. "ON"
5. to confirm
WLAN settings
Note
WLAN settings are only available when internet access
is enabled.
Tap the following on-screen buttons:
1.
2. "Settings"
Further adjustments
Permanently selecting the default display
5835784