24
Depending on the parameters set and internal control
calculations, the control unit offers various boiler
sequences. This ensures that the boilers are equally
loaded.
1. "Menu"
2. "Boiler sequence"
3.
/ for
"New boiler sequence"
Boiler sequence
New boiler sequence
OK
5
4
2
3
1
1
5
3
4
2
B
A
Fig. 19
A
Sequence in which the boilers are started
B
Number permanently assigned to the boiler
4.
Press
OK
to confirm
The diagram shows the following boiler sequence:
1. Boiler 5
2. Boiler 1
3. Boiler 2
4. Boiler 3
5. Boiler 4
Setting the display backlighting
Tap the following buttons:
1. "Menu"
2. "Settings"
3. "Screen"
4. "Brightness standby"
or
"Brightness control"
5.
/ for the required value
6.
Press
OK
to confirm
Naming heating circuits
You can name all heating circuits individually.
Tap the following buttons:
1. "Menu"
2. "Settings"
3. "Name for heating circ."
4.
Select
"Heating circuit 1"
,
"Heating circuit 2"
or
"Heating circuit 3"
and enter the required name,
such as "Ground floor".
Further adjustments
Setting the boiler sequence
5546 498 CA
