Viessmann Vitotrol 350-C, Руководство по эксплуатации

Страница: 20 / 44

20
If you want DHW heating, check the following points:
■ Have you selected the required group?
■ Have you set the required set DHW temperature?
■ Have you set the required time program?
DHW temperatures
Changing the set DHW temperature
Factory setting: 60 °C
Default display
1.
"Menu"
2. "DHW"
3. Select the required group if there are several.
4.
"Temperature"
5. Set the required value.
6. Press
"OK" to confirm
Setting a time program
Further information can be found in chapter
"Terminology" in the appendix.
Factory setting: One time phase from 00:00 to 24:00 h
for every day of the week with operating status "Top" .
You can set time programs in 2 different ways:
■ Via the automatic time program
■ Via the individual time program
Note
■ Between the time phases, DHW is not heated; only
frost protection for the DHW cylinder is active.
■ When inputting settings, please observe the follow-
ing: Your heating system needs a little time to heat
up the DHW cylinder to the required temperature.
Select correspondingly earlier start and stop times.
Automatic time program
Default display
1.
"Menu"
2. "DHW"
3. Select the required group if there are several.
4.
"DHW time program"
Fig. 21
5. Select "Time program Automatic system" .
The message "Automatic DHW heating accep-
ted" is shown.
DHW heating
Settings for DHW heating
5778 774 GB