18
From the remote control, you can only select heating
to reduced room temperature and set a time pro-
gram of 00:00 h to 24:00 h. To do so, delete all time
phases: See page 15.
Rooms are heated to the reduced room temperature
(
"Reduced"
) .
Temporarily adjusting the room temperature
Comfort mode
If you wish to heat your rooms to normal room temper-
ature/comfort room temperature but the current time
program is set to reduced room temperature, select
"Comfort mode"
.
Example:
If guests stay until late in the evening.
"Comfort mode"
is
independent
of the time program
for
"Indoor environment"
.
■
Firstly, the DHW is heated to the set DHW tempera-
ture, before central heating.
This setting can be adjusted by your qualified con-
tractor.
■
The rooms will be heated to the temperature of the
last active time phase (standard room temperature or
comfort room temperature).
■
While
"Comfort mode"
is active, and
"Comfort
mode"
are shown in the default display.
Setting "Comfort mode"
1. Extended menu:
2. "Quick select"
3.
/ for the required heating circuit if necessary
4. "Comfort mode"
Ending "Comfort mode"
"Comfort mode"
ends automatically:
■
After 8 hours.
Note
If you want to make changes to this, please consult
your contractor.
Or
■
When the system switches to standard room temper-
ature or comfort room temperature according to the
time program.
Ending "Comfort mode" manually:
1. Extended menu:
2. "Quick select"
3.
/ for the required heating circuit if necessary
4. "Comfort mode"
Comfort mode is active.
Adjusting the room temperature for longer periods at home
"Holidays at home"
If you are planning to be continually at home for a few
days, but do not want to change the time program,
select
"Quick select"
"Holidays at home"
.
Example:
During the school holidays.
■
"Holidays at home"
has an effect on the periods
between set time phases. The set room temperature
of these periods is raised to the set value of the cor-
responding subsequent time phase (standard room
temperature or comfort room temperature).
■
DHW heating is enabled.
■
While the program is active,
"Holidays at home"
and
are shown in the default display.
■
"Holidays at home"
applies to
all heating circuits
.
Central heating
Switching off central heating permanently
(cont.)
5839324
