9
Your boiler's control unit is set at the fac-
tory.
■ The heating circuits are set to the
"Heating"
operating program.
■ The domestic hot water heating is set
to the
"DHW"
operating program.
Your heating system is therefore ready
for operation:
Central heating
■ From
06:00 to 22:00 h
your rooms are
heated to 22 °C
"Set room temp"
(standard heating mode).
■ From
22:00 to 06:00 h
your rooms are
heated with
"Set red room temp"
(room temperature for reduced heat-
ing mode, night setback).
■ Your heating contractor can make fur-
ther settings for you during commis-
sioning.
You can change any settings at any
time to suit your individual require-
ments (see from page 22).
DHW heating
■ DHW is heated to 60 °C
"Set DHW
temperature"
every day from
00:00
to 24:00 h
.
■ Your heating contractor can make fur-
ther settings for you during commis-
sioning.
You can change any settings at any
time to suit your individual require-
ments (see from page 35).
Frost protection
■ Your boiler, DHW cylinder and heating
water buffer cylinder are protected
against frost.
Wintertime/summertime changeover
■ This changeover is automatic.
Time and date
■ The day and time were set by your
heating contractor during commission-
ing.
Power failure
■ All data is retained if there is a power
failure.
Introductory information
Your system is preset at the factory
5549 811 GB
Содержание Vitoligno 300-H
Страница 71: ...71 5549 811 GB...
