40
You can set these heating times by
adjusting the time program for the heat-
ing water buffer cylinder. During the time
phases set, the heat-up condition of the
heating water buffer cylinder has an
effect on the operation of the boiler.
■ The time program for the heating water
buffer cylinder is made up of time pha-
ses. A time phase from 06:00 to 22:00
h every day is set at the factory.
■ The time program for the heating water
buffer cylinder is preset to
Automatic
mode
at the factory. In automatic
mode, the time program for the heating
water buffer cylinder is disregarded.
■ If you don't require automatic mode,
you can select up to 4 individual time
phases per day. For each time phase
you select the start and end points.
Note
If your are using a solar thermal system
for central heating backup, the heating
times of the heating water buffer cylinder
should be adjusted with the control unit
of the solar thermal system.
Setting time phases
Time prog Buffer
Select with
Individual
Automatic
Press the following keys:
1.
å
for the "Extended menu".
2.
|
/
~
for
"Buffer"
.
3.
d
to confirm.
4.
|
/
~
for
"Time prog"
.
5.
d
to confirm.
6.
|
/
~
for
"Individual"
.
7.
d
to confirm.
8.
|
/
~
until the required part of the
week or day appears.
to select the required part of
the week or day.
9.
d
to confirm.
10.
|
/
~
to select the time phase.
The relevant time phase is
represented by a number
(
!
,
?
,
§
or
$
).
11.
d
to confirm.
Heating water buffer cylinder
Setting the time program
5549 811 GB
Содержание Vitoligno 300-H
Страница 71: ...71 5549 811 GB...
