Viessmann VITOLIGNO 200-S, Инструкция по установке и обслуживанию

Страница: 28 / 108

28
If an additional heat source is to be selected, press the
following keys:
1.
|
/
~
for additional boiler "Yes/No"
2.
d
to confirm.
Selecting the connection for heating circuits 1 to 3
To specify where the respective heating circuit is con-
nected, press the following keys:
1.
|
/
~
for "No" :
Not installed.
for
"On the boiler" (if heating circuit exten-
sion module installed):
Connected at internal PCB.
for
"On the mixer module" :
Connected to extension kit via KM-BUS.
2.
d
to confirm.
DHW connection
Select the connection for DHW heating:
1.
|
/
~
for "No" :
Not installed.
for
"On the boiler" (if heating circuit exten-
sion module installed):
Connected at internal PCB.
for
"On the mixer module" :
Connected to extension kit via KM-BUS.
2.
d
to confirm.
Selecting DHW circulation (if heating circuit extension module installed)
To specify whether a DHW circulation pump is connec-
ted, press the following keys:
1.
|
/
~
for DHW circulation "Yes/No"
2.
d
to confirm.
Selecting the solar connection
Press the following keys:
1.
|
/
~
for "No" :
Not installed.
for
"On the boiler" (if heating circuit exten-
sion module installed):
Connected at internal PCB.
for
"On the external solar module" :
Connected to Vitosolic via KM-BUS.
2. d to confirm.
Commissioning, inspection, maintenance
Selecting an additional boiler
5777 985 GB