Viessmann Vitogate 300 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 28

Viessmann Vitogate 300 Скачать руководство пользователя страница 15

15

Vitotronic 300

Vitotronic 200-H

Vitogate 300

Control unit is fault manager
Parameter/code "79:1" in the "Gen-
eral" group

Control unit is not fault manager.
Code "79:0"

Device is fault manager.

Viessmann system number
Parameter/code "98:1" in the "Gen-
eral" group

Viessmann system number
Code "98:1"

—

LON subscriber fault monitoring
Parameter/code "9C:20" in the
"General" group

LON subscriber fault monitoring
Code "9C:20"

—

Updating LON subscriber list

Vitotronic control unit installation and service
instructions

Carrying out subscriber check

Vitotronic control unit installation and service
instructions

Commissioning the Vitogate

Devices required for commissioning:

■

PC/laptop with the following equipment:

–

Minimum screen resolution 1024 x 768

–

Integral or external Ethernet network module

–

PDF Reader

■

Supported web browsers: Mozilla Firefox version 60
to 62 on Microsoft Windows version 7 or 10

■

Crossed network cable

Making the connection to the Ethernet network

Connect the computer network card to the RJ45 LAN
connection of the Vitogate 300 by means of a crossed
network cable.

Note

If a configuration file is to be loaded via a PC for sev-
eral gateways within a network, a pause of at least ten
minutes must be observed between the applications.
Alternatively, the ARP cache of the PC can be deleted
between the applications.

Enabling the DHCP server

Dynamic Host Configuration Protocol (DHCP) makes
IP addresses available to clients on request.
The DHCP server of the Vitogate 300 can be used to
provide an IP address if the computer has been set up
as DHCP client (standard setting).

Press and hold the reset button on the Vitogate 300 for
at least 10 s, but no longer than 15 s.
The DHCP server has been activated once the status
indicator flashes green/red alternately.

Note

The DHCP server does not need to be activated if a
static IP address is to be used.

Commissioning and adjustment

Integrating the Vitotronic control unit into LON

(cont.)

5837535

Service

«
...
13
14
15
16
17
...
»

Содержание Vitogate 300





























Отзывы:

Нет отзывов