Viessmann Vitocrossal 100 CI1, Инструкции по обслуживанию для подрядчиков

Страница: 8 / 140

8
Commissioning steps
Inspection steps
Maintenance steps Page
•
1. Filling the heating system and checking the supply of ventilation air ......................... 9
•
2. Checking the power supply
•
3. Changing the language (if required) ................................................................................. 9
• •
4. Setting the time and date (if required) .............................................................................. 10
•
5. Naming heating circuits ..................................................................................................... 10
• •
6. Checking the gas type ....................................................................................................... 10
• • •
7. Removing the front panel .................................................................................................. 11
• • •
8. Function sequence and possible faults ........................................................................... 11
• • •
9. Testing the static and supply pressure ............................................................................ 12
•
10. Setting the maximum heating output ............................................................................... 13
• •
11. Checking the combustion chamber pressure limiter ..................................................... 14
• •
12. Removing the burner and checking the burner gasket .................................................. 15
• •
13. Checking the burner gauze assembly and thermal insulation block ............................ 18
• •
14. Checking and adjusting the ignition and ionisation electrodes .................................... 21
• •
15. Cleaning the combustion chamber and heating surfaces ............................................. 21
• •
16. Cleaning the condensate drain system ............................................................................ 22
• •
17. Cleaning the neutralising system (if installed) ................................................................ 23
• •
18. Checking the condensate drain and neutralising system (if installed) for
obstructions and leaks ...................................................................................................... 24
• •
19. Checking the gaskets and thermal insulation sections on the boiler side ................... 25
• •
20. Checking the expansion vessel and system pressure ................................................... 25
• •
21. Checking the water quality ................................................................................................ 25
• •
22. Checking the mixer for ease of operation and leaks ...................................................... 26
• • •
23. Checking all connections on the heating water and DHW sides for leaks
• • •
24. Checking the safety valve function
• •
25. Installing the burner ........................................................................................................... 26
• • •
26. Checking the firm seating of electrical connections
• • •
27. Checking all gas equipment for tightness at operating pressure ................................. 26
• • •
28. Checking the combustion quality ..................................................................................... 26
• •
29. Checking the ventilation air apertures in the installation room (only for open flue
operation)
• • •
30. Checking the external LPG safety valve (if installed)
•
31. Matching the control unit to the heating system ............................................................ 28
•
32. Adjusting heating curves .................................................................................................. 28
•
33. Connecting the control unit to the LON ........................................................................... 29
•
34. Calling up and resetting the "Service" display ............................................................... 31
• • •
35. Mounting the front panel ................................................................................................... 31
•
36. Instructing the system user .............................................................................................. 32
Commissioning, inspection, maintenance
Steps – commissioning, inspection and maintenance
5792 925 GB