Viessmann Vitocal 222-A, Инструкция по установке и обслуживанию

Страница: 69 / 156

69
Date/Time
set
Parameter group
select
Function check
start
Function
select
Subscriber check
carry out
Actuator test
carry out
Signal inputs
display
Sensor values
display
Start commissioning?
Temperature
sensors
Signal inputs
Actuator test
Commissioning terminated Control mode
OK
OK
OK
OK
OK
OK
NO
YES
Function
check
Subscriber check (LON)
Language Set
Date
set
Time
set
OK
OK OK
Coding
level 1
Parameters
set
OK
OK
OK OK
Fig. 60
Commissioning without the commissioning assistant
Activating the service menu
The service menu can be activated from any other
menu.
Press and hold
OK +
å
simultaneously for approx.
4 s.
Deactivating the service menu
The service menu remains active until it is disabled
with
"Terminate service?" , or if no key is pressed for
30 min.
Setting parameters using "System scheme 7000"
as an example
To set a parameter, first select the parameter group
and then the parameter.
Service menu:
1. Press and hold OK +
å
simultaneously for
approx. 4 s.
2. Select "Coding level 1" .
3. Select parameter group: "System definition"
4. Select parameter: "System scheme 7000"
5. Set a system scheme: e.g. "6"
Alternatively, if the service menu was already active:
Extended menu:
1.
å
Commissioning, inspection, maintenance
Commissioning the system
(cont.)
5831412