Viessmann Vitocal 200-S, Инструкция по установке и обслуживанию

Страница: 78 / 148

78
Checking the system function (e.g. actuators, temperatures, heat
meter if applicable)
Only for type AWB-AC
!
Please note
If the heat pump is exposed to
temperatures below –15 °C dur-
ing storage or transport, the high
limit safety cut-out of the instan-
taneous heating water heater
may respond.
Heat up the high limit safety cut-
out to above 20 °C and press
reset button
A on the high limit
safety cut-out.
A
Instructing the system user
The system installer should hand the
operating instructions to the system user
and instruct the user in operating the
system.
This includes all components installed as
accessories, e.g. remote control units. In
addition, the system installer must make
the user aware of the required mainte-
nance work.
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5782 176 GB