Preparations
VITOBLOC 200
Operating instructions for the natural gas-fuelled CHP module
17
6130329
GB
2.2
Filling Fuels
2.2.1
Disassembling/Assembling the
Sound Hood
CAUTION
Only ever use the supplied original cab-
inet spanner to avoid damage to the
locks.
Always remember the following when opening and
closing the locks:
Closing:
Raise the sound hood plate and press against the
corresponding frame.
Caution:
There is the danger of breakage if the sound
hood plate drops. This is why it is necessary to wear
protective clothing/shoes.
The lock is open in the initial position
(the dot marks on the lock are 180° to
one another)
Lock the sound-absorbing hood and
turn the spanner 90°
(the dot marks on the lock are now 90°
to one another)
Press on the sound-absorbing hood
while turning the spanner another 90°
(the dot marks on the lock are now op-
posite one another)
Opening:
Raise the sound hood plate and press against the
corresponding frame.
Caution:
There is the danger of breakage if the sound
hood plate drops. This is why it is necessary to wear
protective clothing/shoes.
The lock is closed in the initial position
(the dot marks on the lock are opposite
one another)
Press on the sound-absorbing hood
while turning the spanner 90°
(the dot marks on the lock are now 90°
to one another)
Turn the spanner another 90°
(the dot marks on the lock are now 180°
to one another)