background image

16

4. 

Confirm with 

OK

.

5. 

Use 

+

/

 to select an hour.

6. 

Confirm with 

OK

.

DHW heating is switched on during the highlighted
hour.

7. 

Select further hours.

8. 

To save, press and hold 

OK

 for 3 seconds.

"SAVE"

 appears.

9. 

Repeat these steps for the other days.

Note

If no button is pressed for 30 seconds, the program
closes without saving. 

"EXIT"

 appears.

If the time and day have not yet been set, the heat
pump control unit will ask you to do this. See
page 18
.

DHW demand

The draw-off profile can be changed from L (2 people)
to XL (4 people) to accommodate a higher DHW
demand or provide greater convenience. This change
may only be made by your contractor.

Increased DHW hygiene

This function allows you to improve the microbiological
quality of the water in the DHW cylinder.
To ensure increased DHW hygiene, the drinking water
in your DHW cylinder can be heated to 60 °C at regu-
lar intervals.
Your contractor can set this function at the control unit
and select an interval between 1 and 30 days.

This function switches on regardless of the selected
operating program.
During DHW heating for increased DHW hygiene, the
symbol next to the DHW temperature rotates.

DHW heating

Setting a time program

 (cont.)

5593131

Содержание T0E 060-A





























Отзывы: