Viega LLC
585 Interlocken Blvd.
Broomfield, CO 80021
Phone (800) 976-9819
www.viega.us
Product Instructions
Viega PureFlow Press Connections
Model XXXX.XX
PI-PF 530530 0422 PureFlow Press Connections (EN ES FR)
6
Pure
Flow
1/2”
Pure
Flow
1/2”
1
6
2
7
3
8
9
10
4
12
EN
Viega PureFlow Press Connections
Viega products are designed to be
installed by licensed and trained plumbing
and mechanical professionals who are
familiar with Viega products and their installation.
Installation by non-professionals may void
Viega LLC’s warranty.
The tool locator ring must be in the
factory-installed position while making a
press to ensure a consistent leak-proof
connection. It may be necessary to rotate the
tool locator ring to avoid interference between
the ring and tool.
The tool locator ring must be in the
factory-installed position while making a
press to ensure a consistent leak-proof
connection. It may be necessary to rotate the
tool locator ring to avoid interference between
the ring and tool.
If using hand tools continue with steps
4 to 8. If using power tools skip to
steps 9 to 12.
1
Square off tubing to proper length. Uneven,
jagged, or irregular cuts will produce unsatisfactory
connections.
2
Insert PureFlow Press fitting with attached sleeve
into tubing and engage fully.
3
Ensure full tubing insertion at view holes in
attached press sleeve. Full insertion means tubing
must be completely visible in at least two view
holes and partially visible in the one.
5
Position the PureFlow press tool perpendicular
over the press sleeve, resting it against the tool
locator ring. For 1" tool, close tool jaws to engage
ratchet (ensure that thumb grip is returned fully
forward before closing jaws). Make sure the
PureFlow press tool is properly aligned (see step 7
if it is not).
WARNING!
The connection is not leak-proof when
the tool has been opened by emergency
release. The tool locator ring must be present to
ensure a proper PureFlow Press connection.
WARNING!
The tool locator ring must be present
to ensure a proper PureFlow Press
connection.
CAUTION!
Do not press twice.
CAUTION!
Do not press twice.
11
6
Close handles, using trigger to reduce grip span if
desired.
7
If the PureFlow press tool is not properly aligned
with the locator ring, use the emergency release
(using a screw driver to turn the emergency
release) to open the press tool. Once released,
align the PureFlow press tool properly and go
back to step 5.
5
8
Extend the PureFlow press tool handle and
continue ratcheting until automatic tool release
occurs at the proper compression force.
Pressing with a Power Tool
9
Insert the appropriate PureFlow press jaw into the
press tool and push in the holding pin until it locks.
10
Open jaw and position perpendicular over press
sleeve, resting it against the tool locator ring.
11
Start the pressing process; hold the trigger until
the jaw has automatically released.
12
When press connection is complete, open and
remove the jaw.
DANGER!
Read and understand all instructions for
installing PureFlow Press fittings.
Failure
to follow all instructions may result in extensive
property damage, serious injury, or death.
Pressing with a Hand Tool
4
For the 1" tool, open the tool handles fully (thumb
grip is available to maintain open jaw). Then close
tool jaws to engage ratchet (ensure that thumb
grip is returned fully forward before closing jaws).
EN
Product Instructions
Viega PureFlow Press Connections
This document is subject to updates. For the most current Viega
technical literature please visit
ES
Instrucciones del Producto
Realización de conexiones Viega
PureFlow Press
Este documento está sujeto a actualizaciones. Para obtener la
documentación técnica más reciente de Viega, visite
.
FR
Directives du Produit
Réalisation de connexions serties
Viega PureFlow Press
Le présent document est soumis à des mises à jour. Pour consulter
les manuels techniques Viega les plus récents, reportez-vous au site
Web
