For information, refer to the instructions for use of the Prestabo, Profi‐
press, Sanpress and Sanpress Inox systems.
For information, refer to the instructions for use of the Prestabo, Profi‐
press, Sanpress, and Sanpress Inox systems.
3.1.3
Required tools
The following tools are required for production of a press connection:
n
pipe cutter or a fine-toothed hacksaw
n
deburrer and coloured pen for marking
n
press machine with constant pressing force
n
Press jaw or press ring with corresponding hinged adapter jaw, suit‐
able for the pipe diameter and suitable profile
Fig. 7: Press jaws
Recommended Viega press machines:
n
Pressgun 5
n
Pressgun 4E / 4B
n
Type PT3-AH
n
Type PT3-H / EH
n
Type 2 (PT2)
n
Pressgun Picco
n
Picco
3.2
Assembly
3.2.1
Replacing the sealing element
Laying and fixing pipes
Length expansion
Removing the sealing element
Handling
Easytop ball valve with SC-Contur
16 from 21
